Kussmaul Auto Pump 120 Volt has the following features:
100 PSI Max Rating, 120V, 4A
Vehicle mount compressor ensures air brake system is properly pressurized for immediate truck departure from station
Pressure
switch regulated operation automatically senses low pressure in air
system and restores proper pressure, preventing brake lock-up
No interference with engine mounted air compressor
Factory set PSI actuation points: 75 "On", 95 "Off" with Adjustment differential 20 PSI
Sealed ball bearings for long service life
Compact size
1 year warranty
The
Auto Pump AC is a 120 volt 60 Hz shaded pole A.C. motor operating a
single cylinder air compressor designed specifically for installation on
vehicles with air brakes. During long idle periods of the vehicle, when
even the slightest seepage can cause an air brake system pressure to
drop below the brake lockup pressure, the Auto Pump AC automatically
starts to maintain the pressure.
The
Auto Pump AC motor is directly coupled to the compressor section
eliminating all belts and pulleys and assuring long life and reliable
operation. A heavy duty pressure switch is adjusted to start the
compressor when the system pressure drops below 75 PSI and stops the
compressor when 95 PSI is attained. The start up pressure is field
adjustable - the pressure differential between start up and stopping is
fixed. The moisture trap provided permits routine draining of
accumulated moisture in the Auto Pump output line.
The
Auto Pump AC AD is an 091-9B-1 Auto Pump with an Automatic Drain
installed. A normally open solenoid valve drains the moisture from the
trap each time the compressor shuts down. The Auto Drain assures that
the filter bowl is always drained and does this without intervention by
maintenance personnel.
The
auto drain option also automatically purges water separator bowl every
time compressor cycles off via a normally open solenoid
Product Type
Auto Pump 120V #091-9B-1 or
Auto pump 120V w/ Auto Drain #091-9B-1-AD
