Cutters Edge Concrete Sawing Kit

Cutters Edge Concrete Sawing Kit

Cutters Edge Concrete Sawing Kit

    Cutters Edge Concrete Sawing Kit

    A 23-piece Concrete Sawing Kit that includes a lightweight water pump, hoses, adapters and everything needed to pump water from any source. The CE94CRS cuts a wide range of materials; including reinforced concrete (rebar), masonry brick, concrete block, natural stone and abrasive concrete. A powerful 5.7 cu Inch (94cc) engine engineered specifically for concrete cutting with an advanced crankshaft sealing design, sealed throttle shaft, waterproof ignition and a special air filtration system are just some of the “NEXT GENERATION TECHNOLOGY” features that allow this new internal combustion engine to operate at peak performance in the wet, rescue concrete cutting environment.

    • (1) Diamond plate aluminum case
    • (1) CE94CRS-12A, CE94CRS-14A or CE94CRS-16A gasoline powered Concrete Cutting Chain Saw
    • (1) MP2531CE-1 pump. Installed on the pump:
      • 1" (NPSH) female x ¾" (GHT) male adapter
      • 1" female to male camlock fitting
      • 1 scrench tool for pump
    • (1) 1" x 10 ft. suction hose with blue check valve
    • (1) 0.75" x 25 ft 250 psi Myti-flo woven hose
    • (1) 0.75" x 75 ft 250 psi Myti-flo woven hose
    • (1) 2.5" female x 0.75" (GHT) male adapter
    • (1) 1.5" female x 0.75" (GHT) male adapter
    • (1) 1" female x 0.75" (GHT) male adapter
    • (1) 0.75" x 0.75" FHT brass hose-to-hose connector
    • (1) Hydrant wrench
    • (1) 1.25 gallon fuel container (UL approved)
    • (1) 3 gallon fuel container (UL approved)
    • (1) 6 ft. fuel line, primer bulb
    • (1) 10" x 9" canvas water container
    • (1) Pair of safety goggles
    • (1) Spray can of lubricant/water displacer
    • (1) 8 oz. bottle, Cutters Edge 2-cycle oil mix
    • (1) ea. CECJ6Y and CECJ8Y Spark plug
    • (1) Tool kit (includes ear plugs and Torx head scrench)
    • Manual/Illustrated Parts List
    • Warranty card